Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0 (GENERIC) #0: Sun Apr 26 22:53:55 UTC 2009 builds@b4.netbsd.org:/home/builds/ab/netbsd-5-0-RELEASE/macppc/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/macppc/compile/GENERIC total memory = 1024 MB avail memory = 985 MB timecounter: Timecounters tick every 10.000 msec found openpic PIC at 80040000 OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. bootpath: /pci@f4000000/ata-6@d/disk@0:4/netbsd mainbus0 (root) cpu0 at mainbus0: 7447A (Revision 1.1), ID 0 (primary) cpu0: HID0 8450c0bc, powersave: 1 cpu0: 668.73 MHz, 512KB L2 cache no parity parity enabled memory0 at mainbus0: len=256 spdmem0 at memory0 spdmem0: DDR SDRAM memory, no parity or ECC, 1024MB, 333MHz (PC-2700) spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7 spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) uni_n0 at mainbus0 address 0xf8000000 hw-clock at uni_n0 not configured ki2c0 at uni_n0 address 0xf8001000 iic1 at ki2c0: I2C bus dbcool0 at ki2c0 dbcool0: ADT7463 dBCool(tm) Controller (rev 0x06, stepping 0x02) cereal at ki2c0 address 0x1c0 not configured uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00) genfb0 at pci0 dev 16 function 0: ATI Technologies Radeon Mobility 9600/9700 (M10/11) NP genfb0: framebuffer at 0xb8008000, size 1280x854, depth 8, stride 1280 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at genfb0 not configured uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) Broadcom BCM4306 (miscellaneous network, revision 0x03) at pci1 dev 18 function 0 not configured cbb0 at pci1 dev 19 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00) obio0 at pci1 dev 23 function 0: addr 0x80000000 zsc0 at obio0 irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at obio0 offset 0x10000: irq 30,1,2 pmu0 at obio0 offset 0x16000 irq 47: rev. 12 pmu0: initializing IIC bus pmu0: initializing RTC pmu0: initializing ADB nadb0 at pmu0: Apple Desktop Bus pmu0: power-mgt not configured smartbat0 at pmu0 addr 0: smart battery flags: 5 AC present ki2c1 at obio0 iic2 at ki2c1: I2C bus cereal at ki2c1 address 0x1c0 not configured deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer atabus0 at wdc0 channel 0 snapper0: codec: TAS3004 audio0 at snapper0: full duplex ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci0: can't map mem space ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci1: can't map mem space ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci2: interrupting at irq 29 ohci2: OHCI version 1.0, legacy support usb0 at ohci2: USB revision 1.0 ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43) ohci3: interrupting at irq 63 ohci3: OHCI version 1.0 usb1 at ohci3: USB revision 1.0 ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43) ohci4: interrupting at irq 63 ohci4: OHCI version 1.0 usb2 at ohci4: USB revision 1.0 ehci0 at pci1 dev 27 function 2: NEC USB Host Controller (rev. 0x04) ehci0: interrupting at irq 63 ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci3 ohci4 usb3 at ehci0: USB revision 2.0 cbb0: cacheline 0x8 lattimer 0x10 cbb0: bhlc 0x21008 cbb0: interrupting at irq 53 cardslot0 at cbb0 cardbus0 at cardslot0: bus 1 pcmcia0 at cardslot0 uninorth2 at mainbus0 pci2 at uninorth2 bus 0 pci2: i/o space, memory space enabled pchb2 at pci2 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) wdc1 at pci2 dev 13 function 0: interrupting at irq 39 atabus1 at wdc1 channel 0 fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81) fwohci0: interrupting at irq 40 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:0d:93:ff:fe:2d:f3:fa fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80) gem0: interrupting at irq 41 makphy0 at gem0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 1 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto gem0: Ethernet address 00:0d:93:2d:f3:fa, 10KB RX fifo, 4KB TX fifo biomask 8003ffe netmask 8003ffe ttymask 8003ffe timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 18432000 Hz quality 100 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) uhub0 at usb0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered uhub2 at usb2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 5 ports with 5 removable, self powered atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) adbkbd0 at nadb0 addr 2: PowerBook G3 keyboard wskbd0 at adbkbd0 mux 1 wskbd0: connecting to wsdisplay0 wsmouse0 at adbkbd0 mux 0 adbms0 at nadb0 addr 3: EMP trackpad 4-button, 400 dpi wsmouse1 at adbms0 mux 0 adbbt0 at nadb0 addr 7: button device AC Power: AC adapter online. uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Apple Computer product 0x1000, rev 2.00/15.86, addr 2, iclass 3/1 ukbd0 at uhidev0 uhidev1 at uhub1 port 1 configuration 1 interface 0 uhidev1: Logitech USB Receiver, rev 1.10/46.00, addr 2, iclass 3/1 ums0 at uhidev1: 8 buttons and Z dir. wsmouse2 at ums0 mux 0 uhidev2 at uhub1 port 1 configuration 1 interface 1 uhidev2: Logitech USB Receiver, rev 1.10/46.00, addr 2, iclass 3/0 uhidev2: 16 report ids uhid0 at uhidev2 reportid 16: input=6, output=6, feature=0 wskbd1 at ukbd0: console keyboard, using wsdisplay0 uhidev3 at uhub0 port 1 configuration 1 interface 1 uhidev3: Apple Computer product 0x1000, rev 2.00/15.86, addr 2, iclass 3/1 ums1 at uhidev3: 5 buttons wsmouse3 at ums1 mux 0 wd0 at atabus1 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wskbd0: disconnecting from wsdisplay0