Toshiba Tecra 8100

From NetBSD Wiki

I have run this laptop for several years with 3.0, 4.0, 5.0 and later kernels and it always worked well.

The only thing that doesn't work is the winmodem, so far as I know.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.01 (GALANT) #0: Fri Oct 31 18:21:29 GMT 2008
	plunky@galant:/var/obj/sys/arch/i386/compile/GALANT
total memory = 127 MB
avail memory = 113 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
TOSHIBA T8100 (Version 1.0)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 797MHz, id 0x686
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <TOSHIB,750     ,00970814>, AslId <TASM,04010000>
LNKA: ACPI: Found matching pin for 0.11.INTA at func 0: 255
LNKB: ACPI: Found matching pin for 0.11.INTB at func 1: 255
LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 11
LNKE: ACPI: Found matching pin for 0.7.INTA at func 0: 3
LNKD: ACPI: Found matching pin for 0.12.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.5.INTD at func 2: 11
LNKD: ACPI: Found matching pin for 1.0.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (PIT, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (NDP, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
FDD (PNP0700) at acpi0 not configured
COM (PNP0501) at acpi0 not configured
PRT1 (PNP0400) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: (null), Li-ION  , XM8001P02    1000222507
acpibat1 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
vald0 at acpi0 (VALD, TOS6200): Toshiba VALD
vald0: AC adaptor connected
vald0: LCD backlight on
vald0: get LCD brightness via _BCL
_BCL retrun: 7 packages
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 96.0C active cooling level 1: 96.0C critical 97.0C passive 26.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x5333 product 0x8c10 (rev. 0x11)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
savagedrm0 at vga1: Savage/MX-MV (unit 0)
[drm:pid0:drm_load] 
[drm:pid0:drm_agp_init] agp_available = 1
savagedrm0: AGP at 0xe0000000 128MB
[drm:pid0:drm_mtrr_add] offset=e0000000 size=134217728
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
savagedrm0: Initialized savage 2.4.1 20050313
pcib0 at pci0 dev 5 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
piixide0 at pci0 dev 5 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 5 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 5 function 3
piixpm0: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
vendor 0x11c1 product 0x0441 (miscellaneous communications, revision 0x01) at pci0 dev 7 function 0 not configured
oboe0 at pci0 dev 9 function 0: Toshiba Fast Infrared Type O, revision 0
oboe0: interrupting at irq 11
irframe0 at oboe0: SIR, MIR, FIR
cbb0 at pci0 dev 11 function 0: vendor 0x1179 product 0x0617 (rev. 0x20)
cbb1 at pci0 dev 11 function 1: vendor 0x1179 product 0x0617 (rev. 0x20)
yds0 at pci0 dev 12 function 0: vendor 0x1073 product 0x0010 (rev. 0x02)
yds0: interrupting at irq 11
yds0: ac97: Asahi Kasei AK4544 codec; headphone, 18 bit DAC, 18 bit ADC, AKM 3D
yds0: ac97: ext id 201<AMAP,VRA>
audio0 at yds0: full duplex, mmap, independent
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 20
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x40
cbb1: bhlc 0x824000
cbb1: interrupting at irq 11
cardslot1 at cbb1
cardbus1 at cardslot1: bus 21
pcmcia1 at cardslot1
opl0 at yds0: model OPL3
midi1 at opl0: DS-1 integrated Yamaha OPL3 (CPU-intensive output)
mpu0 at yds0
midi2 at mpu0: Yamaha DS-1 MIDI UART (CPU-intensive output)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <SAMSUNG MP0603H>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA720 DVD/CDRW, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs