IBM Thinkpad T23
From NetBSD Wiki
Here is dmesg from NetBSD-live CD which I used on this laptop:
NetBSD 2.0E (NETBSD_ROCKS) #0: Tue Apr 27 00:36:43 CEST 2004
juan@Nocturno:/home/juan/livecd/work/NETBSD_ROCKS
total memory = 510 MB
avail memory = 494 MB
BIOS32 rev. 0 found at 0xfd7e0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1199.03 MHz, id 0x6b4
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <IBM ,TP-1A ,00001150>, AslId < LTP,00000000>
acpi0: failed to look up EC object \SB.PCI0.LPC.EC: AE_NOT_FOUND
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.FDC_._INI] (Node 0xc109c7a0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc10968e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1096100), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1096100), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1097f80), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1097f80), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc109c800), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc109c800), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc109ce20), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc109ce20), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.NEST._STA] (Node 0xc109c640), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.NEST._STA] (Node 0xc109c640), AE_NOT_EXIST
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1096100), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1096100), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1097f80), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1097f80), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc109c800), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc109c800), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc109ce20), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc109ce20), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.NEST._STA] (Node 0xc109c640), AE_NOT_EXIST
ACPI-0178: *** Error: Method execution failed [\_SB_.NEST._STA] (Node 0xc109c640), AE_NOT_EXIST
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0 irq 13
npx0: using exception 16
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (IBM3780): aux port
pckbc2: irq 12
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc109c8e0), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc109c900), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc109c940), AE_NOT_EXIST
ACPI-1290: *** Error: Method execution failed [\_SB_.PCI0.LPC_.FDC_._FDE] (Node 0xc109c760), AE_NOT_EXIST
lpt0 at acpi0 (PNP0400)
lpt0: io 0x3bc-0x3be irq 7
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
IBM006A at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel 82830MP CPU to AGP Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage/IXC (rev. 0x05)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at pci2 dev 0 function 0 not configured
Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at pci2 dev 0 function 1 not configured
Lucent Technologies LTMODEM (miscellaneous communications, revision 0x01) at pci2 dev 2 function 0 not configured
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:02:8a:96:86:26
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801CAM LPC Interface (rev. 0x02)
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: can't map codec i/o space
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
WARNING: Callback scheduled before sysmon task queue thread present.
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0213> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: <unknown>
root on cd0a
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
And here is the dmesg output from NetBSD 3.0 running on IBM Thinkpad T23
NetBSD 3.0 (GENERIC_LAPTOP) #0: Mon Dec 19 01:08:52 UTC 2005
builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC_LAPTOP
total memory = 254 MB
avail memory = 243 MB
BIOS32 rev. 0 found at 0xfd7e0
PCI BIOS rev. 2.1 found at 0xfd8fe
pcibios: config mechanism [1][x], special cycles [x][x], last bus 8
PCI IRQ Routing Table rev. 1.0 found at 0xfdeb0, size 256 bytes (14 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x2482 A 0x00 11 0 already assigned
000:29:1 0x8086 0x2484 B 0x03 11 0 already assigned
000:29:2 0x8086 0x2487 C 0x02 11 0 already assigned
000:31:1 0x8086 0x248a A 0x02 11 0 fixed up
000:31:3 0x8086 0x2483 B 0x01 11 0 already assigned
000:31:5 0x8086 0x2485 B 0x01 11 0 already assigned
001:00:0 0x5333 0x8c2e A 0x00 11 0 already assigned
002:00:0 0x104c 0xac51 A 0x00 11 0 already assigned
002:00:1 0x104c 0xac51 B 0x01 11 0 already assigned
002:02:0 0x11c1 0x0449 A 0x02 11 0 already assigned
002:08:0 0x8086 0x1031 A 0x04 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:3575
PCI fixup examining 8086:3576
PCI fixup examining 5333:8c2e
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:2482
PCI fixup examining 8086:2484
PCI fixup examining 8086:2487
PCI fixup examining 8086:2448
PCI fixup examining 104c:ac51
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:ac51
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 11c1:449
PCI fixup examining 8086:1031
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI fixup examining 8086:248c
PCI fixup examining 8086:248a
PCI fixup examining 8086:2483
PCI fixup examining 8086:2485
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
10h mem 0xd0000000 0x10000000
[OK]
000:01:0 0x8086 0x3576
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
001:00:0 0x5333 0x8c2e
10h mem 0xc0100000 0x00080000
14h mem 0xe8000000 0x04000000
18h mem 0xe4000000 0x04000000
1ch mem 0xe0000000 0x02000000
[OK]
002:00:0 0x104c 0xac51
10h mem 0x50000000 0x00001000
[OK]
002:00:1 0x104c 0xac51
10h mem 0x51000000 0x00001000
[OK]
002:02:0 0x11c1 0x0449
10h mem 0xc0201000 0x00000100
14h port 0x00006440 0x00000008
18h port 0x00006000 0x00000100
[OK]
002:08:0 0x8086 0x1031
10h mem 0xc0200000 0x00001000
14h port 0x00006400 0x00000040
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x0ff5c000
PCI memory mapped I/O space start: 0x10000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
10h mem 0xd0000000 0x10000000
[OK]
000:01:0 0x8086 0x3576
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x10000000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
001:00:0 0x5333 0x8c2e
10h mem 0xc0100000 0x00080000
14h mem 0xe8000000 0x04000000
18h mem 0xe4000000 0x04000000
1ch mem 0xe0000000 0x02000000
[OK]
002:00:0 0x104c 0xac51
10h mem 0x50000000 0x00001000
[OK]
002:00:1 0x104c 0xac51
10h mem 0x51000000 0x00001000
[OK]
002:02:0 0x11c1 0x0449
10h mem 0xc0201000 0x00000100
14h port 0x00006440 0x00000008
18h port 0x00006000 0x00000100
[OK]
002:08:0 0x8086 0x1031
10h mem 0xc0200000 0x00001000
14h port 0x00006400 0x00000040
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1132.44 MHz, id 0x6b4
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: "Mobile Intel(R) Pentium(R) III CPU - M 1133MHz"
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel 82830MP CPU to AGP Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage/IXC (rev. 0x05)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
Lucent Technologies LTMODEM (miscellaneous communications, revision 0x01) at pci2 dev 2 function 0 not configured
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:d0:59:cf:5f:d6
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
auich0: measured ac97 link rate at 47986 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
cbb0: wait took 0.019886s
Realtek, Rtl8139, M^?M^? (manufacturer 0x0, product 0x0) Realtek Semiconductor 8180 802.11b (ethernet network, revision 0x20) at cardbus0 dev 0 function 0 not configured
wd0 at atabus0 drive 0: <IC25N030ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 62016 cyl, 15 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8081N, , 0012> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
