Compaq Presario M2005US
From NetBSD Wiki
The HP-Compaq Presario M2005US is a 2005-model i386 laptop.
dmesg(8)s
NetBSD 2.1
Jonathan Kollasch's dmesg
Kernel config diff:
--- GENERIC_LAPTOP 2005-07-21 14:28:02.000000000 -0500 +++ SANTRAGINUS 2005-10-27 20:55:12.000000000 -0500 @@ -136,16 +136,16 @@ #options GATEWAY # packet forwarding options INET # IP + ICMP + TCP + UDP options INET6 # IPV6 -#options IPSEC # IP security -#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) +options IPSEC # IP security +options IPSEC_ESP # IP security (encryption part; define w/IPSEC) #options IPSEC_DEBUG # debug for IP security #options MROUTING # IP multicast routing -options NS # XNS +#options NS # XNS #options NSIP # XNS tunneling over IP -options ISO,TPIP # OSI +#options ISO,TPIP # OSI #options EON # OSI tunneling over IP -options CCITT,LLC,HDLC # X.25 -options NETATALK # AppleTalk networking protocols +#options CCITT,LLC,HDLC # X.25 +#options NETATALK # AppleTalk networking protocols options PPP_BSDCOMP # BSD-Compress compression support for PPP options PPP_DEFLATE # Deflate compression support for PPP options PPP_FILTER # Active filter support for PPP (requires bpf) @@ -199,7 +199,7 @@ # allocate a number of virtual screens at autoconfiguration time #options WSDISPLAY_DEFAULTSCREENS=4 # use a large software cursor that doesn't blink -options PCDISPLAY_SOFTCURSOR +#options PCDISPLAY_SOFTCURSOR # modify the screen type of the console; defaults to "80x25" #options VGA_CONSOLE_SCREENTYPE="\"80x24\"" @@ -831,7 +831,7 @@ pseudo-device gre 2 # generic L3 over IP tunnel pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith 1 # IPv[46] tcp relay translation i/f -#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation +pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation pseudo-device vlan # IEEE 802.1q encapsulation pseudo-device bridge # simple inter-network bridging
dmesg(8) output:
NetBSD 2.1 (SANTRAGINUS) #0: Thu Oct 27 21:03:16 CDT 2005
root@santraginus.kollasch.net:/usr/src/sys/arch/i386/compile/SANTRAGINUS
total memory = 222 MB
avail memory = 211 MB
BIOS32 rev. 0 found at 0xfd760
PCI BIOS rev. 2.1 found at 0xfd9c2
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdf40, size 160 bytes (8 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX) compati
ble)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x3582 A 0x00 10 0 already assigned
000:29:0 0x8086 0x24c2 A 0x00 10 0 already assigned
000:29:1 0x8086 0x24c4 B 0x03 3 0 already assigned
000:29:2 0x8086 0x24c7 C 0x02 4 0 already assigned
000:29:7 0x8086 0x24cd D 0x07 3 0 already assigned
000:31:1 0x8086 0x24ca A 0x02 4 0 fixed up
000:31:3 0x8086 0x24c3 B 0x01 5 0 already assigned
000:31:5 0x8086 0x24c5 B 0x01 5 0 already assigned
000:31:6 0x8086 0x24c6 B 0x01 5 0 already assigned
002:00:0 0x10ec 0x8139 A 0x00 10 0 already assigned
002:09:0 0x104c 0x8031 A 0x04 11 0 fixed up
002:09:2 0x104c 0x8032 C 0x06 4 0 already assigned
------------------------------------------
PCI fixup examining 8086:3580
PCI fixup examining 8086:3584
PCI fixup examining 8086:3585
PCI fixup examining 8086:3582
PCI fixup examining 8086:3582
PCI fixup examining 8086:24c2
PCI fixup examining 8086:24c4
PCI fixup examining 8086:24c7
PCI fixup examining 8086:24cd
PCI fixup examining 8086:2448
PCI fixup examining 10ec:8139
PCI fixup examining 104c:8031
PCI bridge 1: primary 1, secondary 2, subordinate 2
PCI fixup examining 104c:8032
PCI bridge 0: primary 0, secondary 1, subordinate 2
PCI fixup examining 8086:24cc
PCI fixup examining 8086:24ca
PCI fixup examining 8086:24c3
PCI fixup examining 8086:24c5
PCI fixup examining 8086:24c6
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3580
[OK]
000:00:1 0x8086 0x3584
[OK]
000:00:3 0x8086 0x3585
[OK]
000:02:0 0x8086 0x3582
10h mem 0xe8000000 0x08000000
14h mem 0xe0000000 0x00080000
18h port 0x00001800 0x00000008
[OK]
000:02:1 0x8086 0x3582
10h mem 0xf0000000 0x08000000
14h mem 0xe0080000 0x00080000
[OK]
000:29:0 0x8086 0x24c2
20h port 0x00001820 0x00000020
[OK]
000:29:1 0x8086 0x24c4 20h port 0x00001840 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x00001860 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xe0100000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x00000000 0x00000008
14h port 0x00000000 0x00000004
18h port 0x00000000 0x00000008
1ch port 0x00000000 0x00000004
20h port 0x00001810 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:3 0x8086 0x24c3
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x24c5
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
18h mem 0xe0100c00 0x00000200
1ch mem 0xe0100800 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x10ec 0x8139
10h port 0x00003000 0x00000100
14h mem 0xe0206800 0x00000100
[OK]
001:09:0 0x104c 0x8031
10h mem 0x00000000 0x00001000
[NG]
001:09:2 0x104c 0x8032
10h mem 0xe0206000 0x00000800
14h mem 0xe0200000 0x00004000
[OK]
--------------------------[ 2 devices bogus]
Physical memory end: 0x0dedc000
PCI memory mapped I/O space start: 0x0df00000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3580
[OK]
000:00:1 0x8086 0x3584
[OK]
000:00:3 0x8086 0x3585
[OK]
000:02:0 0x8086 0x3582
10h mem 0xe8000000 0x08000000
14h mem 0xe0000000 0x00080000
18h port 0x00001800 0x00000008
[OK]
000:02:1 0x8086 0x3582
10h mem 0xf0000000 0x08000000
14h mem 0xe0080000 0x00080000
[OK]
000:29:0 0x8086 0x24c2
20h port 0x00001820 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x00001840 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x00001860 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xe0100000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x00005800 0x00000008
14h port 0x00005808 0x00000004
18h port 0x00005810 0x00000008
1ch port 0x0000580c 0x00000004
20h port 0x00001810 0x00000010
24h mem 0x0df00000 0x00000400
[OK]
000:31:3 0x8086 0x24c3
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x24c5
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
18h mem 0xe0100c00 0x00000200
1ch mem 0xe0100800 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x10ec 0x8139
10h port 0x00003000 0x00000100
14h mem 0xe0206800 0x00000100
[OK]
001:09:0 0x104c 0x8031
10h mem 0x0df01000 0x00001000
[OK]
001:09:2 0x104c 0x8032
10h mem 0xe0206000 0x00000800
14h mem 0xe0200000 0x00004000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium Pro, II or III (686-class), 1296.79 MHz, id 0x6d6
cpu0: features afe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbbf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbbf<FXSR,SSE,SSE2,SS,TM,SBF>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855GM Host-to-Hub Controller (rev. 0x02)
agp0 at pchb0: detected 32636k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
Intel 82855GM GMCH Memory Controller (miscellaneous system, revision 0x02) at pci0 dev 0 function 1 not configured
Intel 82855GM GMCH Configuration Process (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0: Intel 82855GM GMCH Integrated Graphics Device (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82855GM GMCH Integrated Graphics Device (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x03)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB/DBM USB UHCI Controller #2 (rev. 0x03)
uhci1: interrupting at irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB/DBM USB UHCI Controller #3 (rev. 0x03)
uhci2: interrupting at irq 4
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB/DBM USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 3
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x83)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
rtk0 at pci1 dev 0 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 10
rtk0: Ethernet address 00:c0:9f:XX:XX:XX
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci1 dev 9 function 0: Texas Instruments product 0x8031 (rev. 0x00)
Texas Instruments product 0x8032 (Firewire serial bus, interface 0x10) at pci1 dev 9 function 2 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB/DBM SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: CXT48 codec; reserved, headphone, 18 bit DAC, 18 bit ADC, no 3D stereo
auich0: ac97: ext id a04<AC97_23,AMAP,SPDIF>
Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
ath0 at cardbus0 dev 0 function 0ath0: waking up from power state D-973062144
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 802.11 address: 00:09:5b:XX:XX:XX
wd0 at atabus0 drive 0: <FUJITSU MHT2040AT PL>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4243N, , 1.07> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ath0: waking up from power state D-973062144
ath0: interrupting at 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
